Use duster and or vacuum gently with appropriate fitting.
How Your Unique Pendant Lights Work
The pendant light shades come with a standard sized fitting ring, which will suit standard pendant lights. Installation of your lamp shade is quick and simple, and can be done in a few simple steps.
Step 1: Remove the bulb
Before you do anything, make sure that you have switched your light off; it's a good idea to turn off the mains electric at the fuse box. Then first of all, remove the light bulb from your pendant fitting.
Step 2: Undo the light fitting
Next you need to unscrew the bottom of the light fitting. A lot of pendant lights have a black ring, with tabs to make this easy to locate and twist - for those that don't, you should be able to see the line where the two parts split if you look closely. Once you have done this step, you should have revealed a screw thread.
Step 3: Fasten your lampshade
After this all you need to do is place your lampshade on the fitting (it should just slide over the thread) and replace the piece that you just removed, which will hold the lampshade in place.
Step 4: Replace the bulb
Finally replace the bulb, switch on your electrics, and try switching the light on to test that you've correctly inserted your bulb - it really is as easy as that.
Your shade will come with a removable adaptor to alter the size of the fitting ring, as displayed in the image above.
These unique pendant light shades, like many of our products, benefit from our fantastic quantity discount. As these custom pendant lights are perfect for all the family, order one for each room and save money today.
For Your Safety: Inner layer is a BS standard fire rated material - BS EN 60598 - 1:2008 650 Glow wire test (clause 13.3.2) only. For the smaller sizes - 20cm round and oval - the maximum wattage is 40w bulb. For all other sizes, use 60w-100w bulbs but we recommend cool energy saving bulbs for all our lampshades.