Caring for your fabrics is easy, if you follow our simple instructions!
You can position your designs on your fabric labels as you wish however here are a few words of caution:
Keep your label design clean and bold.
Please note that High contrast graphics eg black text on a light background, will cause problems on our 3.5 neoprene.
2: Turn the lighter upside down, use a paperclip to lift the felt covering the cotton wadding.
3: Slowly and carefully pour in lighter fluid. When the fluid is visible at the top of the wadding stop filling. Wait for 10 seconds, then repeat. When the cotton remains saturated your lighter is full. If fluid drips out of the bottom you have put too much fluid in. Leave lighter on an in-flammable surface and allow excess fuel to evaporate for 5 minutes.
4: Push the lighter back into its case, ensuring it is fully inserted. Wipe the lighter and your hands to remove any excess fluid.
5: Allow your lighter to sit for 2-3 minutes with the lid open. DO NOT STRIKE A LIGHT. This allows any excess lighter fluid on the outside of the case to evaporate.
6: Test your lighter is working by striking the thumb wheel.
To replace the flint in your lighter:
2: Turn the lighter upside down. Using a small flathead screwdriver unscrew the brass screw counterclockwise.
3: Remove the screw head with attached spring. Turn the lighter upside down and tap on the top to remove any remaining flint material.
4: Drop a new flint into the tube. Re-insert the spring and tighten clockwise. Do not over tighten the screw.
TIP: a spare flint or two can stored underneath the felt.
Due to our maximum print width of 1.5m, larger duvet covers or bed sheets will need to be printed in separate panels and stitched together by our team of in-house experts. Every design or photo is different, so we have devised 4 different stitch patterns you can select. Please choose the one that best suits the composition of your image.
Please bear in mind that when joining the pieces, there may be some margin of mismatch or loss of image across the seams. We do everything possible to minimise this. If uploading images of people or adding text, try to avoid important details like faces crossing the seam lines, as these will be difficult to align accurately.
We Make Big 50cm and Medium 40cm square cushions covers which can fit inner pads 60cm and 45cm (to nicely fill the whole cover).
SPIN TO WIN!