Use duster and or vacuum gently with appropriate fitting.
How Your Pendant Light Shades Work
Square pendant light shades come with a standard sized fitting ring, for standard pendant lights. Putting your lamp shade up is simple to do, and won't take very long at all.
Step 1: Prepare
Before you start, make sure that your light is off - if you can it's best to turn off the electric at the main fuse box. Then just remove the light bulb from your pendant fitting.
Step 2: Remove bottom
After that you'll need to unscrew the bottom of the fitting. Most pendant lights will have a black, tabbed ring to make this easy to find and once you've got it all you need to do is twist - for pendants that don't have a black ring, the line where the two parts split should be easy to find if you look closely. When the bottom part is completely unscrewed you will be able to see the exposed thread underneath.
Step 3: Install lampshade
Now simply put your lampshade over the exposed thread on the fitting and then put the bottom part back on again. The lampshade should now be held in place.
Step 4: Test
Last but not least, put the bulb back in, switch your electrics back on, and try the light - it's that easy.
Your shade will come with an adaptor that is removable so that you can adjust the size of the fitting ring.
How your Square Pendant Light Shades Will Look
To give your custom ceiling lights an authentic feel we use a Stiff Translucent textile which is ever so slightly textured. You can choose whether to have the painted frame with the fitting located at the top or the bottom of the shade, and it will be backed with a fire rated inner lining. Your custom design will be printed in full colour all the way up to the edges of the frame so there won't be any gaps, unless you have intentionally put them in.
As is the case with many of our products, these custom pendant light shades are part of our quantity discount scheme. If you order more than one at the same time, not only can you create beautiful custom hanging lights for more rooms in your home, but you can take advantage of a lower price as well.
For Your Safety: Inner layer is a BS standard fire rated material - BS EN 60598 - 1:2008 650 Glow wire test (clause 13.3.2) only. For the smaller sizes - 20cm round and oval - the maximum wattage is the 40w bulb. For all other sizes, use 60w-100w bulbs but we recommend cool energy saving bulbs for all our lampshades.